Oli Natura Hardwax Oil is designed to protect and enhance interior timber surfaces while maintaining a natural appearance. Suitable for floors, furniture, parquetry, stairs, benchtops and joinery, it provides a durable, water-repellent finish that highlights the timber grain rather than masking it.
Below is a straightforward application guide to achieve consistent results.
Preparation determines the final result.
Do not apply over old coatings unless they have been completely removed.
Stir the product thoroughly before use.
Apply a generous, even coat using:
The goal is to fully wet the surface so the timber can absorb the oil.
After application, work the product into the surface using:
This helps the timber absorb the oil evenly and improves penetration. Ensure all areas are evenly covered.
Allow the oil to sit briefly — just long enough for absorption. Do not allow it to skin or dry on the surface.
Remove all excess oil using a clean, lint-free cloth or buffing pad.
No wet patches should remain. The surface should feel dry to the touch.
Allow to cure in accordance with the product data sheet.
Ensure adequate ventilation during drying.
Oli Natura Hardwax Oil is available in Natural/Clear and Natural/Clear Matte finishes. It carries ECARF Allergy-Friendly certification and is suitable for surfaces that may come into contact with food once fully cured.
If you require guidance on coverage rates, recoat times, or suitability for your project:
📞 Call our technical team on 1300 887 853
🌐 Submit an enquiry via our website
Superior Timber Coatings are here to help you Coat With Confidence.