Aqualis Timber Clean is an eco-friendly tannin and oil remover for both new and aged timber. It works seamlessly with Aqualis Timber Prep to thoroughly clean and prepare surfaces before applying Aqualis H2Oil.
Use plastic sheeting to protect areas and wet plants in the cleaning zone. Be cautious of slippery surfaces.
Follow safety instructions from the Safety Data Sheet; wear goggles, gloves, and protective clothing.
- Wet the surface thoroughly with clean water.
- Apply Timber Clean as recommended, scrub with a stiff broom or mechanical scrubber, and leave for 2-3 minutes to penetrate.
- Keep the surface wet; do not let the solution dry.
- Rinse off thoroughly with fresh water, removing all residues.
- While the timber is still wet, wash with Timber Prep solution as recommended, scrubbing for 2-3 minutes.
- Rinse off with fresh water to remove any greasy film.
- Allow the surface to dry for up to 24 hours before coating with Aqualis H2Oil.
Avoid prolonged contact with aluminum surfaces; rinse off Timber Clean promptly if necessary.
