Ilva 720 Easystain is a concentrated, solvent-based dye stain developed in Italy for interior timber. It delivers exceptional transparency and brilliance, enhancing the natural grain of solid and veneer timbers. The system provides uniform colour penetration and can be applied easily by spray, roll, brush, or cloth.
Formulated using genuine Ilva fade-resistant dyes, 720 Easystain maintains colour stability and clarity even after prolonged exposure to UV light. Designed for professional use, it produces an elegant, even finish with consistent tone and minimal grain masking — ideal for furniture, doors, panels, kitchen cabinetry, and shop fittings.
Excellent colour strength, transparency, and grain definition
Fade-resistant dyes tested under UV exposure for superior colour stability
Easy application — spray, dip, roll, brush, or cloth pad
Reduces blotching, flecking, and shadowing in corners
Non–grain raising formulation
Can be added (up to 10%) to solvent-based clears for toning
Quick drying and easy recoat times for fast production workflow
Suitable for a wide range of interior timber applications
Available in both traditional and modern colours (custom colours and colour matching available on request)
Preparation:
Ensure substrate is clean, dry, and sanded to a smooth, even surface (typically 180–240 grit).
Remove all sanding dust prior to application.
Application Methods:
Spray (Conventional or Pressure Pot):
Nozzle: 1.3–1.7 mm
Pressure: ~280 kPa (35 psi)
Apply with a medium to wide fan for even coverage.
Wipe, Dip, Roll, or Brush:
Apply evenly along the grain using a clean cloth or applicator.
Work the stain into the timber for uniform penetration.
Not Recommended: Air-assisted, air-mix, or airless systems.
Drying Time (25°C / 60% RH):
Touch dry: 10–15 minutes
Ready for sealer coat: 30–40 minutes
Thinning (if required):
Use TZ720 Stain Thinner, TZ35 PU Fast Thinner, or TZ14S Reducer to achieve lighter tones.
Supplied ready for use.
Coverage:
~16 m²/L (cloth pad)
~9 m²/L (spray)
Clean Up:
Clean tools immediately after use with TZ720 Stain Thinner, TZ35 PU Fast Thinner, or TZ075 Lacquer Thinner.
Topcoats:
Seal and finish with a compatible Ilva clear coating system — consult your STC Technical Sales Consultant for recommendations.
Important Notes:
Interior use only.
Do not apply below 10°C or above 80% relative humidity.
Dispose of used rags safely — submerge in water to prevent spontaneous combustion.
Refer to SDS before use.
