When using professional coatings, final results depend on more than just product quality. For best outcomes:

General Considerations
• Results depend on ambient conditions (temperature, humidity), substrate quality and preparation, consistent application technique, equipment setup, and correct use of the product.
• Some product loss during industrial use is normal and not considered a fault.
• Colour and finish may vary depending on conditions – always test first.

Product Guarantee
• The product meets the chemical and physical specifications listed in the Technical Data Sheet (TDS).
• If it does not meet these specifications, it will be replaced.
• Final results are outside our control and cannot be guaranteed.

Recommended Application Conditions
• Ambient temperature: 18–22°C
• Relative humidity: 65–70%
• Substrate moisture content: 8–14%
• Apply between 15°C and 30°C
• Drying must occur above 15°C
• Relative humidity during drying: 50–70%

Usage and Storage
• Shake all products well before use, including after adding catalysts, accelerators, or thinners.
• Use only polyethylene or stainless steel containers for decanting.
• Store solvent-based products indoors between 0°C and 35°C, in a ventilated area, away from sunlight.
• Always reseal containers tightly after use.

User Responsibility
• Ensure the product is appropriate for your application and environmental conditions.
• Follow all hygiene and safety guidelines provided in the Safety Data Sheet (SDS).
• Use spark-proof equipment when handling solvent-based products.
• Do not smoke during use.
• Always check that you are using the most current version of the TDS – the validity date is printed on the document. Contact your local technical team if unsure.