Our Hemp Oil is cold pressed from farm-grown hemp, sourced directly from farmers committed to sustainable practices. Free from chemicals and solvents, it offers a safe, environmentally responsible way to finish your timber projects.

Designed for solid timbers only, this deep-penetrating oil nourishes from within. The long cure time allows the oil to fully absorb into the wood, strengthening and conditioning it over time.

Cold pressed and chemical-free, this hemp oil dries to a natural matte finish, penetrates deeply for lasting performance, is water-resistant, easy to maintain, and cleans up with just soap and water.  It’s not just low voc, its ZERO VOC.

Use it on benchtops, furniture, trim, cupboards, doors, or to revive tired timber.

Not suitable for veneer.

Natural protection you can trust.

Application

Application Instructions – Hemp Oil Finish

• Suitable for use on bare, unfinished, or previously coated wood. Ensure the surface is clean, dry, and free from grease or wax.

• Stir well before use.

• Always test on a sample piece to confirm desired appearance.

• For best results, apply 2–3 coats in temperatures between 16°C – 27°C with relative humidity between 40% and 60%.

• Apply with a brush, painter’s pad, or clean cloth. Allow the oil to soak into the surface.

• After at least 1 hour, wipe off excess oil. Do not leave excess overnight.

• Apply additional coats if needed. Buff the final coat by hand or machine using a white pad, then finish with a terry cloth towel.

• Allow 7–10 days for minimum cure; full cure in 15–30 days.

Coverage: Approximately 12–15 m² per litre.