TX90 is a hardener specifically developed for Ilva acrylic urethane coatings. It is engineered to provide the right balance of hardness, flow, and surface performance in clear or pigmented systems, ensuring durability across interior timber applications.
TX90 is suitable for professional use on timber joinery, furniture, veneer, and commercial fit-outs where consistency and chemical resistance are required. For best results, application must follow standard protocols for preparation, temperature, and humidity control.
Optimum application conditions:
• Ambient temperature between 18 and 22 °C
• Ambient relative humidity between 65 and 70%
• Substrate moisture content between 8 and 14%
Conditions to observe:
• Application must not occur below 15 °C or above 30 °C
• Drying must not occur below 15 °C
• Ambient relative humidity during drying should be between 50% and 70%
• Store between 0 °C and 35 °C in a ventilated space, away from direct sunlight
• Shake well before use, including after mixing with other components
• Use only suitable containers (polyethylene, stainless steel) for decanting
• Reseal container carefully after each use
The end result of the coating cycle is the responsibility of the user. Always refer to the latest Technical Data Sheet and follow safe handling procedures.
