When using professional coatings, final results depend on more than just product quality. For best outcomes:

General Considerations

• Factors like ambient temperature, humidity, substrate condition, and application method all affect the finish.

• A certain level of material waste is normal during industrial application and does not indicate a product fault.

• Colour and finish can be affected by how the surface is prepared and the application environment – always test first.

Product Responsibility

• We guarantee the chemical and physical specs listed in the TDS.

• If the product doesn’t match those specs, it will be replaced.

• However, we can’t accept responsibility for the final result due to variations in use.

Recommended Conditions for Application

• Ambient temperature: 18–22°C

• Relative humidity: 65–70%

• Substrate moisture: 8–14%

Important Usage Notes

• Shake well before use – including after adding catalysts or additives.

• Apply between 15°C and 30°C.

• Drying should not occur below 15°C.

• Maintain 50–70% relative humidity during drying.

• Use appropriate containers (polyethylene or stainless steel) for decanting.

• Store indoors, between 0°C and 35°C, away from sunlight and well-ventilated.

• Reseal containers tightly after use.

Safety

• Use spark-proof equipment when handling solvent-based products.

• Never smoke during use.

• Follow safety and hygiene requirements as per SDS.

• Always check you have the latest TDS version before starting.